All Waterproofing & Repellants
Browse waterproofing and repellents products that are available by calling (800) 969-1754.
Waterproofing:
MasterSeal 610/615:
Cold-applied water-based emulsified-asphalt damp-proofing and vapor-retarding coatings for use on “green” or slightly damp surfaces.
Water Repellents:
MasterProtect H 200:
Clear, water-based 20% alkylalkoxysilane penetrating sealer. It protects against moisture and chloride intrusion.
MasterProtect H 400:
Clear, water-based 40% alkylalkoxysilane penetrating sealer. It provides long-lasting protection against moisture intrusion, freeze/thaw cycles, and chloride intrusion.
MasterProtect H 1000:
Clear, breathable, high-performance, 100% silane, water repellent sealer that achieves highest depth of penetration.
MasterProtect H 177:
High-performance, water-based, VOC-compliant, clear silane/siloxane sealer designed for dense, vertical masonry surfaces like hard-burnt brick.
MasterProtect H 185:
High-performance, water-based, clear, silane/siloxane sealer designed to provide long-term protection for the most challenging split-faced and lightweight block as well as standard CMU.
100:
High-performance, clear, 100% silane penetrating sealer
Enviroseal 20:
Clear, water-based 20% silane penetrating sealer
Enviroseal 40:
Clear, water-based, 40% silane penetrating sealer
Enviroseal 7:
Water-based silane/siloxane water-repellent sealer
Enviroseal Double 7 for Brick:
High-performance, water-based, silane/siloxane water-repellent sealer
Enviroseal PBT (Porous Block Treatment):
High-performance, water-based, patented silane/siloxane blended water-repellent sealer for lightweight block.
Deck Coatings:
MasterSeal M 200:
A liquid applied moisture-cure polyurethane seamless waterproofing membrane
MasterSeal TC 225 (formerly Sonoguard):
A liquid applied moisture cure polyurethane seamless coating. The aliphatic top coat ensures long life and suitability for public locations.
MasterSeal TC 275:
A aromatic, polyurethane top coat for use in MasterSeal Traffic 2000, 2500 and 2575 deck coating systems. A two-component, fast-curing waterproofing coating. This material has outstanding mechanical properties, including high tensile strength and excellent tear and abrasion resistance with high solids
MasterSeal TC 295:
An aliphatic, polyurethane top coat for use in MasterSeal Traffic 2000, 2500, 2530 and 2575 deck coating systems. The TC 295 is a two-component, waterproofing coating. This material is a high performing
polyaspartic modified polyurethane with high solids.
MasterSeal P 225:
A two-component polyurethane-based adhesive primer for use in MasterSeal Traffic 2500, 2530 and 2575 deck coating systems.
MasterSeal M 205:
A low VOC one-component, moisture curing polyurethane base coat for use in: MasterSeal Vehicular Traffic 1500 Low VOC, MasterSeal Vehicular Traffic 2000 Low VOC, MasterSeal Pedestrian Traffic 1500 Low VOC, MasterSeal Pedestrian Traffic 2000 Low VOC.
Conipur II Deck Coating System:
High-solids polyurethane waterproofing, traffic bearing membrane systems for vehicular and pedestrian areas.
Sonoguard Deck Coating System:
Polyurethane waterproofing, traffic bearing membrane systems for vehicular and pedestrian areas.
Below Grade:
Sonolastic HLM-5000 (Roller Grade):
Liquid, cold-applied elastomeric waterproofing membrane system.
COLPHENE 3000:
Self-adhesive waterproofing membrane composed of SBS modified bitumen and a tri-laminated woven polyethylene facer. The underface is covered with silicone release film.
COLPHENE LM BARR:
A single component, 98% solids content, liquid applied, moisture curing elastomeric waterproofing membrane.
COLPHENE BARR Flashing:
A single component, 100% solids content, liquid applied, moisture curing elastomeric waterproofing membrane. COLPHENE BARR Flashing’s STPE moisture cure technology forms a continuous, tough elastic seal to the substrate that withstands extreme cold and high- temperatures without cracking or softening.
Below Grade:
TREMproof 250GC:
Rapid-curing, high-solids, VOC compliant modified polyurethane waterproofing membrane. It can be applied to damp and green concrete.
Paraseal:
HSPW/Bentonite Sheet Membrane Dual Waterproofing System; Self-sealing sheet waterproofing membrane manufactured to controlled thicknesses of 150 mils to 200 mils of tough, high density polyethylene (HDPE) and expandable granular Bentonite. Used on structures below grade or between slab. Excellent for use on poured and block foundations walls, split slab parking and plaza decks. It has outstanding performance when used under conditions of high water head and installed prior to the concrete pour such as retaining walls, elevator pits, etc. 4’ x 24’ standard rolls.
Permaquick PQ200:
Crystalline capillary waterproof coating. Ideal for stopping water in all concrete structures: water tanks, basement walls, tunnels, lift pits, waterproofing floor slabs, swimming pools, and sewerage treatment plants.
TremDrain Series Drainage Mats:
Multi-Composite Drainage and Protection Boards
Vulkem 201(Roller Grad):
Fluid-applied, elastomeric coal-tar free waterproofing. Designed for use on backfilled walls and planters and may be used in split slab applications.
Vulkem 250GC:
Single Component, Rapid Curing, Fluid-Applied Elastomeric Waterproofing Membrane. Designed fo ruse on backfilled walls, split slab applications, planters and submerged conditions.
Deck Coatings:
PUMA Technology:
Designed to have tenacious adhesion and extreme abrasion resistance.
Vulkem 350/351:
Composite waterproofing system comprised of tough-curing liquid polyurethane. The system uses an aggregate-laden top membrane to aid in slip-resistance and wear-resistance. May be used to apply a seamless, monolithic waterproof membrane to concrete surfaces. A cold-applied deck coating system designed for waterproofing plaza decks, pedestrian walkways and balconies.
Vulkem 350/351/346:
A modified polyurethane Traffic Deck Coatings Systems comprised of a base coat (350), heavy duty intermediate coat (345) and a top coat (346). Designed to have tenacious adhesion, extreme impact and abrasion resistance along with remarkable chemical stability. A cold applied Traffic Deck Coating System designed for waterproofing concrete slabs and protecting occupied areas underneath from water damage.
Below Grade:
1000:
A two-component high performance coating and lining that forms a seamless, tough elastomeric membrane
1000 Trowel Grade:
A tough, liquid applied, two component, chemical and corrosion resistant urethane elastomer coating, chemically thickened to allow trowel applications with minimum sag.
1061:
A two-component high performance coating and lining that forms a seamless, tough elastomeric lining.
61 BG Epoxy Primer:
A two-component epoxy primer that is primarily used to limit outgassing or bubbling on porous substrates like concrete
Bonding Agent:
An organo-silicone compound dispersed in isopropyl alcohol. The bonding agent improves the adhesion of CIM high performance coatings to a variety of surfaces.
Scrim:
Is a three ounce stitch bonded polyester material that is used to provide for uniform applications over cracks, details, vertical to horizontal transitions and can also be used as a backing when applied over earthen surfaces.
Water Repellants & Coatings:
Allguard Silicone Elastomeric Coating:
Water-based silicone elastomer for waterproofing above-grade exterior masonry substrates.
Protectosil CHEM-TRETE PB 100:
Clear, penetrating, breathable water repellent for use on exterior above-grade concrete masonry units, brick masonry and most natural stones. Provides resistance against water, alkali attack, acid rain and waterborne staining. Penetrates into the substrate and chemically bonds with silica to forma permanent attachment of the water repellent molecule.
Protectosil CHEM-TRETE BSM 400:
Pure silane that yields a water repellent with the longest service life available, unsurpassed performance on brick masonry and the lowest possible levels of volatile organic compounds. Can be applied in the most extreme temperature conditions without changing the surface appearance of the substrate.
Baracade Silane 100 C:
Breathable, ready-to-use, colorless, non-yellowing, deep penetrating concrete and masonry water repellent. BARACADE SILANE 100 C is a 100% silane formulation that produces a hydrophobic treatment to reduce water absorption.
Baracade WB 244:
Ready-to-use, water-based siloxane/silane penetrating water repellent sealer. BARACADE WB 244 soaks into the substrate and forms a water and chloride barrier that protects concrete and masonry from the damaging effects of water and salts, especially in freeze-thaw climates and marine environments.
Deck Coatings:
Sikalastic 720 One Shot:
A two-component, integral texture, fast-curing, aliphatic, chemically cured, elastomeric polyurethane waterproofing coating intended for vehicular and pedestrian traffic
Sikalastic 726 Balcony One Shot:
A two-component, aliphatic, chemically cured, elastomeric polyurethane waterproofing coating system that has both superior flexibility and abrasion resistance.
Sikalastic 710:
A two-component, integral texture, fast-curing, aliphatic, chemically cured, elastomeric polyurethane waterproofing coating intended for vehicular and pedestrian traffic
Sikalastic 715:
A two-component, aliphatic, chemically cured, elastomeric polyurethane waterproofing coating system that has both superior flexibility and abrasion resistance.
Sikalastic 720:
A two-component, aromatic, chemically cured, elastomeric polyurethane coating intended for use as the waterproofing base coat under polyurethane or epoxy wearing surfaces for pedestrian and vehicular traffic bearing applications.
Sikalastic 735 AL:
A single component, aliphatic, moisture cured, elastomeric polyurethane coating intended for use as the traffic bearing wear and top coat over polyurethane waterproofing membrane for pedestrian and vehicular traffic bearing applications.
Sikalastic 736 AL Textured:
A single component, aliphatic, moisture cured, low VOC, elastomeric polyurethane coating intended for use as the traffic system top coat over polyurethane waterproofing membrane for pedestrian and vehicular traffic bearing applications.
Sikalastic 745 AL Textured:
A two-component, aliphatic, chemically cured, elastomeric polyurethane coating intended for use as the traffic bearing wear and top coat over polyurethane waterproofing membrane for pedestrian and vehicular traffic bearing applications, and as a protective top coat over polyurethane waterproofing membrane under a separate wearing course such as concrete or asphalt pavement, and tile in a setting bed.
Water Repellants & Coatings:
Saltguard WB (water-based):
Deeply penetrating water and salt barrier for concrete.
Weather Seal Blok-Guard & Graffiti Control:
Water and graffiti repellant.
Weather Seal Natural Stone Treatment WB:
Economical water repellant.
Weather Seal Siloxane PD:
Long-lasting, prediluted water repellant.
Weather Seal Siloxone WB Concentrate:
Long-lasting, high-performance repellant.
Below Grade:
650 Mastic:
Is an asphalt/rubber based mastic which provides excellent adhesion
Polyguard 650 Waterproofing Membrane:
Membrane (roll), structural concrete, masonry and wood surfaces. 650 Mastic is an integral part of the Polyguard Waterproofing System and substitutions are not allowed. 650 Mastic is designed to protect the termination edges, overlaps, patches and any additional detailing areas.
Our Locations
Cleveland, Ohio
Call Us Today (216) 267-1550
Hours & Closures Mon – Fri 7am to 5pm EST (Closed Holidays)
Our Store & Warehouse 13320 Enterprise Ave, Cleveland, Ohio 44135
Akron, Ohio
R.L. Wurz has expanded to serve our customers better in the Akron, Canton, and Youngstown area. This new location is near I-76, I-77, St.Rt. 8 and E.Market St.