All Air and Vapor Barriers
AirLok Flex:
Designed as an above-grade air, weather and vapor impermeable coating to prevent the infiltration and exfiltration of moisture and air.
R-Guard Division:
Spray Wrap:
Fluid-applied air and water-resistive barrier.
Fast Flash:
Waterproofing, adhesive and detailing compound for air barrier applications that combines the best characteristics of silicone and polyurethane.
Joint & Seam:
Designed to fill openings and create transitions where flexible reinforcement is required to bridge larger gaps and provide continuous support of fluid-applied flashing membranes, waterproofing or air barrier components.
MVP:
Spray Wrap MVP is a fluid-applied air and water-resistive barrier that stops air and water leakage in cavity wall, masonry veneer construction, as well as in stucco, EIFS and most other building wall assemblies.
VB (Vapor Barrier):
Fluid-applied air and water-resistive barrier that stops air and water leakage in cavity wall, masonry veneer construction, as well as in stucco, EIFS and most other building wall assemblies.
ExoAir 110AT:
A 22-mil composite impermeable membrane that is comprised of 16 mils of butyl and 6 mils of HDPP facer. It can be used as the membrane, detailing accessory, as well as thru-wall flashing of an air barrier system.
ExoAir 110:
A composite 40-mil sheet designed for use as the membrane or as a component of an air barrier system.
ExoAir 230:
Fluid-applied synthetic permeable air barrier membrane is a monolithic, elastomeric membrane designed to be rolled or sprayed onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.
ExoAir 220:
Fluid-applied permeable air barrier membrane is a monolithic, elastomeric membrane designed to be rolled or sprayed onto exterior above-grade wall assemblies to mitigate air infiltration/exfiltration and water penetration while remaining permeable to the passage of water vapor.
ExoAir 130:
Fluid-applied permeable air barrier membrane is a monolithic, elastomeric membrane designed to seal exterior above-grade wall assemblies and mitigate air infiltration/exfiltration, vapor transmission and water penetration. It is available in a single grade that can be roller or spray applied using the appropriate spraying equipment.
ExoAir 120:
Fluid-applied permeable air and vapor barrier membrane is a monolithic, elastomeric membrane designed to seal exterior above-grade wall assemblies and mitigate air infiltration/exfiltration, vapor transmission and water penetration.
SOPRASEAL Xpress G:
An exterior grade, inorganic faced gypsum board with an air and vapor barrier factory applied to the exterior surface.
SOPRASEAL LM 203:
A one-component spray applied non-permeable air barrier membrane used in wall construction.
SOPRASEAL LM 202 VP:
A one-component spray applied vapor-permeable air barrier membrane used in wall construction.
SOPRASEAL LM 204 VP:
A one-component, 98% solids content, liquid applied, vapor-permeable air barrier membrane used in wall construction.
SOPRASEAL Stick 1100T:
A self-adhered waterproofing membrane. Composed of a proprietary high quality elastomeric styrene- butadiene-styrene (SBS) polymer-modified bitumen blend and a woven polyethylene composite facer.
SOPRASEAL Liquid Flashing:
A high quality, 100% solid low odor elastomeric polyether membrane. SOPRASEAL Liquid Flashing material is designed to provide air and water protection to critical rough openings while sealing joints and creating a seamless transition to air barrier membranes.
Air-Bloc 31MR:
Liquid-applied with a trowel or spray, a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces. Cures to a tough, monolithic rubber-like membrane.
Air-Bloc 32MR:
Liquid-applied by spray or trowel, this low-VOC, one-component elastomeric membrane is designed to provide an air and vapor barrier when applied to a range of construction surfaces. Cures to a monolithic rubber-like membrane that resists air leakage.
Air-Bloc 17MR:
Spray, roll- or brush-applied, a one-component, rubberized membrane that provides an air barrier when applied to a range of construction surfaces.
Air-Bloc 16MR:
A fluid applied, vapor impermeable air and water barrier when applied to above-grade wall assemblies. It is single-component, water-based and cures to a tough monolithic rubber-like membrane, which resists air leakage and water penetration.
Air-Bloc 33MR:
A UV-resistant, one-component, elastomeric membrane that provides an air barrier on a range of construction surfaces.
Air-Bloc LF (Liquid Applied Flashing):
A moisture cure single-component elastomeric liquid-applied flashing using a highly advanced Silyl-Terminated Polyether (STPE) polymer. It is designed to cure through reaction with airborne moisture to provide a heavy-duty, seamless, rubber-like impervious membrane with excellent weathering and water resistance.
Blueskin SA (Self Adhesive):
A self-adhering membrane consisting of an SBS rubberized asphalt compound laminated on a blue polyethylene film. Impermeable to air, moisture vapor and water, designed to install easily on a variety of prepared substrates.
Our Locations
Cleveland, Ohio
Call Us Today (216) 267-1550
Hours & Closures Mon – Fri 7am to 5pm EST (Closed Holidays)
Our Store & Warehouse 13320 Enterprise Ave, Cleveland, Ohio 44135
Akron, Ohio
R.L. Wurz has expanded to serve our customers better in the Akron, Canton, and Youngstown area. This new location is near I-76, I-77, St.Rt. 8 and E.Market St.